ENGINEERED STEEL PIERING

Helical Pier Foundation Repair

When part of your foundation sinks, steel helical piers can support it by transferring its weight to deeper, more stable soil. We’ll inspect your foundation and explain whether helical piers are a good fit for your property.

Homeowner and construction worker shaking hands at a residential building site.

How Helical Piers Support a Settling Foundation

When the soil beneath a footing can no longer support it evenly, one part of your home may begin to sink. Helical piers, also called screw piers, are steel shafts with spiral plates that turn into the ground until they reach soil capable of carrying the load. Brackets connect the piers to the existing footing, allowing the weight of the affected section to transfer to deeper, more stable soil. During your inspection, Superior Foundation Repair will assess where the foundation has settled, explain whether helical piers are a good fit, and discuss whether lifting the settled section is practical.

  • High-strength galvanized steel piers anchored to stable bedrock

  • The ultimate stabilization for severe structural settlement

  • Custom torque-engineered for Salt Lake City & St. George soils

  • 100% Transferable Lifetime Warranty for permanent stability

SERVICE HIGHLIGHTS

Specialized Solutions Included

  • Helical Anchor Installation

    Helical Anchor Installation

    Rotary hydraulic drive heads screw galvanized steel piers into load-bearing soil strata until target torque values are achieved.

  • Heavy Brackets & Attachments

    Heavy Brackets & Attachments

    Industrial strength steel brackets secured under existing foundation footings to transfer home weight onto installed piers.

  • Torque & Capacity Monitoring

    Torque & Capacity Monitoring

    Real-time digital torque pressure monitoring during installation verifying exact tonnage capacity per pier.

  • Commercial & Retrofit Piering

    Commercial & Retrofit Piering

    Helical pier deep foundation solutions engineered for light commercial structures, new builds, retaining walls, and boardwalks.

When Do You Need Helical Piers?

Not all foundation issues can be fixed with simple surface repairs or crack injections. When Utah's expansive clays cause deep-seated settlement, you will notice these signs of extreme structural stress that require deep helical anchoring.

Separating Chimneys

Your heavy masonry chimney is noticeably leaning or pulling away from the exterior siding of your house, creating a massive gap.


Recurring Foundation Cracks

Cracks that you have patched or repaired in the past, only to have them reopen wider as the house continues to sink deeper into the soil.


Severe Masonry Failure

Large stair-step cracks in exterior brickwork where you can easily fit a finger inside the gap, indicating massive structural shifting.


Visible Exterior Sinking

One corner or an entire side of your home appears noticeably lower than the rest of the structure from the outside.


Failed Retaining Walls

Heavy concrete or block retaining walls that are leaning outward significantly or actively collapsing due to unstoppable soil movement.


After
Before
BEFORE & AFTER
Contact us

Ready to Protect Your Home's Value & Safety?

Don't wait for minor foundation cracks or floor sloping to turn into costly structural failure. Get an honest, expert engineering inspection anywhere in Utah.